Your Location:  Home > News
  • Pollution and Control in the Production of Magnesia Refractory Materials

    The sources of pollution and pollutants produced in the production of magnesia refractories are: production of emitted dust; smoke, dust, sulfur dioxide, nitrogen oxides, and carbon monoxide emitted from the furnace; phenolic resin, asphalt...18-06-27

  • Factors to consider when selecting insulation materials

    In choosing the insulation material for industrial furnaces, it is necessary to have a good understanding of the properties of the material itself in order to integrate the characteristics of the furnace itself and choose the suitable insul...18-06-26

  • Causes of reticular cracks in high alumina refractory bricks

    The appearance of mesh cracks on the surface of high-alumina bricks often presents shortcomings when producing high-alumina bricks, and the reason for the onset of mesh cracks is complicated. Clinker impurity content (especially R2O content...18-06-25

  • The characteristics of mullite insulation bricks

    1. Foaming Foams for Lightweight Heat Preserved Bricks Bubbles with uniform bubble diameters can be obtained. 2. The foam is independent, and it is not easy to form connecting holes. The closed-cell rate of the foamed concrete prepared is h...18-06-22

  • Analysis of anti-spalling mechanism of anti-stripping high alumina bricks

    The use of high alumina bauxite as the main raw material, the introduction of a small amount of ZrO2 (because ZrO2 is monoclinic and tetragonal phase transformation, can improve the products thermal shock stability), adding a certain amount...18-06-21

  • The nature of the mullite brick determines its role

    The firebrick made of sintered or fused mullite as the main raw material may be entirely made of mullite, partly may be mullite, and some may be made of corundum. The former is called mullite firebrick and the latter is called corundum-mull...18-06-13

  • High-strength and low-thermal mullite products

    The mullite corundum products have high strength, good thermal shock resistance, strong erosion resistance, and high temperature volume stability. The lightweight mullite corundum material has a porous or fibrous structure, and usually has...18-06-12

  • Insulation of glass bottom and wall

    Taking the road of sustainable development has always been a principle issue that must be followed and adhered to in the industrial development of our country and the world. The problem of waste of energy in industrial kilns has always exis...18-06-11

  • Light insulation board manufacturing method

    Light insulation board refers to a heat insulation board with a bulk density of less than 850kg/m3 and a thickness of less than 6cm. This insulation board is attached to the external wall of a building and has the functions of heat preserva...18-06-08


Contact Us

  • E-mail :sales@sunriserefr.com
  • Phone : +86-371-63838939
  • Fax:+86-371-63835539
  • Company Address : No.36 Fengchan Road Of Zhengzhou, Henan, China (Mainland)
Title:
Name:
Tel:
*E-mail:
Country or Region:
*Message: